Brush machine is divided into card brush and line brush mode two, the former directly on the brush machine, the latter through the data line and the computer connected after the brush machine. So to use wire-brush mode, first go to fastboot mode. So how do you get in?
The bl lock has been released
The bl lock has been unlocked: (fastboot wire-brush mode) First, press the power button above to shut down. After long pressing the power button as shown in Figure 1, select the shutdown option in Figure 2.
Then hold down the power button while holding down the volume button minus -, and keep holding until the picture shown in Figure 2 appears. The representative is already in this mode. For those who are not unlocked, they cannot enter this mode and must be unlocked first.
Enter recovery mode on startup: (Swipe mode) Click Settings in Figure 1 and My Device in Figure 2.
Click on the click version in Figure 1, and click on the three dots in the upper right corner in Figure 2.
Then click on recovery Mode in Figure 1, and you will see the menu in Figure 2 after restarting, which proves that you are in Recovery mode.